Limit switches: For remote position
indication & sequencing.
Electric or pneumatic
Watertight or explosion proof
SP-DT or DP-DT
Low power
AS-Interface and Device Net
Pressure switches: A device which
transmits an electrical signal at a preset pressure.
Positioners: Utilize plant air
as the power source to precisely position an actuator relative to a control
signal (such as 3 to 15 psig instrument air) from a remote device.
Transducers: Convert an electrical control to a pneumatic control signal
(e.g., 4 to 20 ma 3 to 15 psig).
Filters and lubricators: Filters
are recommended when the condition of plant or instrument air could affect
the performance of control devices. Lubricators are recommended in all systems
not operated by positioners.
Solenoid valves: For remote electrical
actuation:
General purpose or explosion
proof
Voltage (AC or DC)
2-way
3-way (1 for spring return actuator)
4-way (1 for double acting actuator)
Maximum pressure and temperature
Pneumatic pilot valves: For remote
pneumatic actuation.
Check valves and shuttle valves:
To allow flow in only one direction or to divert flow to another direction.
Quick exhaust valves: To permit
fast opening and/or closing by exhausting the cylinder directly to atmosphere.
Speed control valves: To throttle the air flow to and from the actuator
to meet the operational characteristics of the system.
Regulators and relief valves: To regulate the supply pressure to the
actuator.
|